5 FAH-2 H-230
TELEGRAPHIC ADDRESS AND PRECEDENCES
(CT:TEL-71; 11-08-2018)
(Office of Origin: IRM/BMP/GRP)
5 FAH-2 H-231 WHAT INFORMATION
MANAGEMENT SPECIALISTS SHOULD KNOW ABOUT ADDRESSES
(CT:TEL-11; 07-19-2004)
(Uniform all agencies)
a. All plain language address designators (PLADs) must
follow standard formats. On the pseudo-header, the database in the
communications terminal, normally the TERP V, sets the format used. This
database is duplicated on the CableXpress server. When the terminal formats
the telegram, it adds a routing indicator (RI) for each addressee listed. This
is a five to eight letter symbol usually starting with "R."
Communications terminals and switches use this RI to route the telegram to its
destination.
b. The PLAD is the telegraphic address name for U.S.
Government transmission facilities. Allied Communications Publication 117 (ACP
117) lists PLADs and RIs used by all U.S. Government transmission facilities.
The Department of State Teletypewriter Routing Guide (DOSPUB) lists PLADs for
Department of State transmission and relay facilities.
c. The Information Programs Center (IPC) is required to
maintain the DOSPUB with all current changes. You can also access the DOSPUB
on the publication section of the IRM home page, the InfoCenter section of the
IRM home page, and on IRM/OPS/MSO site on OpenNet.
5 FAH-2 H-232 ORIGINATING
ORGANIZATION'S ADDRESS
(CT:TEL-71; 11-08-2018)
(Uniform all agencies)
The originating organizations telegraphic address is
separated from the pseudo header by one line of space or appears directly after
the operating signal ZFF, if used. The listing of your originating station is
always a PLAD entry. The communications terminal automatically enters your RI
in the appropriate place when it formats the outgoing telegram.
5 FAH-2 H-233 ACTION AND INFORMATION
ADDRESSEES
(CT:TEL-71; 11-08-2018)
(Uniform all agencies)
a. Immediately after the line containing the
originating post's address, the drafter first lists the action addresseesthose
that need to take action on the telegram. They are followed by the info
addressees who are those that simply need to know the content of the telegram.
b. See 5 FAH-2 H-440 on the proper format to use for action and info
addressees and their precedences.
5 FAH-2 H-234 SINGLE-ADDRESS AND
MULTIPLE-ADDRESS TELEGRAM
(CT:TEL-71; 11-08-2018)
(Uniform all agencies)
a. The drafter can send a telegram to one or many
addressees simultaneously (unless the telegram is captioned NODIS. NODIS
telegrams are to be sent only to the Department, unless the Executive Secretary
has explicitly authorized lateral transmissions to other addressees, as with
certain NODIS subcategories):
(1) A single-address telegram is addressed to only one
addressee. On a single address, TERP V will not include the routing indicator
on the PLAD line. See 5 FAH-2
H-321.7-1 for more information; and
(2) A multiple-address telegram is addressed to two or
more addressees. When you use multiple addresses, TERP V will format the
heading to include the routing indicator for each PLAD, separated from the PLAD
by a forward slant (/). See 5 FAH-2
H-321.7-2 for more information.
b. See 5 FAH-1 H-210 for more information on formatting addresses on
outgoing telegrams.
5 FAH-2 H-235 COLLECTIVE ADDRESS
(CT:TEL-71; 11-08-2018)
(Uniform State/USAID)
a. Collective addresses group posts according to
regional bureaus, geographic areas, or common interest in a policy or issue.
This makes addressing telegrams to several addressees more manageable.
b. Collective addresses usually do not include non-Department of State posts or missions. The drafters must list these addresses
separately.
c. At post, you can use only field-originated
collective addresses. To send to a Department collective, the drafter can send
the telegram to the Department with an attention indicator to pass (or also
pass) to the collective.
d. Drafters and approving officers must consider
whether a collective is warranted and tailor the address pattern, using XMT, to
only those posts that need the information. Indiscriminate use of collective
addresses will result in posts receiving telegrams that do not pertain to them.
e. See 5 FAH-2 H-235 for more information on collective addresses.
5 FAH-2 H-235.1 Collective
Address from Other Agencies
(CT:TEL-11; 07-19-2004)
(Uniform all agencies)
Some Federal agencies with offices abroad that use the
Diplomatic Telecommunications Service (for example, USDOC, DEA) originate their
own telegraphic collective addresses.
5 FAH-2 H-236 MILITARY ADDRESSEE
INDICATOR GROUPS (AIGS)
(CT:TEL-11; 07-19-2004)
(Uniform all agencies)
A military addressee indicator group (AIG) is a military
address designator representing a group of addressees, military or civilian.
It is used in the same manner as Department collective addresses. Using AIGs
reduces message heading size and expedites telegram handling. The format for
this type of address is the acronym AIG followed by an identifying number
assigned by military authorities, for example, AIG 346.
5 FAH-2 H-236.1 Restrictions
Regarding Use of AIGs
(CT:TEL-11; 07-19-2004)
(Uniform all agencies)
Only military facilities may originate telegrams addressed
to AIGs. However, information programs centers (IPC) processes all AIG
telegrams of which the post is a member.
5 FAH-2 H-236.2 Method for Updating
AIGs
(CT:TEL-11; 07-19-2004)
(Uniform all agencies)
a. Military commands regularly send telegraphic updates
of an AIG's composition to the members of that AIG. These provide the current
list of action and information addressees, and any descriptive information for
the addressees comprising the AIG.
b. Periodically, a military command sends updated lists
incorporating all previous changes in AIG composition to the defense attach's
office (DAO) by mail or pouch.
c. The information programs center (IPC), as the
posts information and records authority, must coordinate closely with DAO and
post management on AIGs. Together they must ensure that post is a member of
only AIGs addressing subject matter of interest to the post and DAO.
d. To relieve your post from receiving an abundance of
unneeded telegrams, and if information management (IM), post management, and
DAO agree, IPC can request not to receive telegrams sent to particular AIGs.
To do so, IPC must send a formal telegraphic request to the appropriate AIG
cognizant authority requesting that it remove your post from that AIG. All
offices concerned must clear the telegram.
5 FAH-2 H-237 INFORMATON MANAGEMENT
SPECIALIST (IMS) INFORMATION ON PRECEDENCE AND HANDLING SYMBOLS
5 FAH-2 H-237.1 Precedences
(CT:TEL-71; 11-08-2018)
(Uniform State/USAID)
a. The precedence denotes the relative order in which
telegrams are processed and handled: at the originating station, the relaying
station(s) if any, and the recipient station. Precedence of a telegram
indicates:
(1) To the originating station, the order of
transmission;
(2) To the relay station, the order of relaying the
telegram;
(3) To the receiving communications center, the order
of processing and delivery; and
(4) To the action addressee, the order in which the
recipient should note or take action on the message.
b. Drafters should bear the following points in mind
when assigning precedence:
(1) Importance of the subject does not imply urgency
(high precedence); and
(2) Drafters should not assign a high precedence to a
telegraphic response just because the original telegram carried a high
precedence. Drafters should consider each telegram on its own merit.
c. See 5 FAH-2 H-423
for more information on authorized precedences and acknowledgment services for
high-precedence traffic.
5 FAH-2 H-237.2 Handling Symbols
(CT:TEL-2; 05-23-2002)
(Uniform State/USAID)
The handling symbols CRITIC, NIACT, and POUCH define
unique procedures for handling telegrams.
5 FAH-2 H-237.2-1 CRITIC
(CT:TEL-11; 07-19-2004)
(Uniform State/USAID)
a. Use CRITIC to communicate vital national security
information. You must process this type of telegram before those with any
other precedences. Critic telegrams use a different format (DOI-103) than
other telegrams.
b. See 5 FAH-2 H-431
and the Critic Handbook for more information on Critic and Critic Exercises.
5 FAH-2 H-237.2-2 NIACT
(CT:TEL-71; 11-08-2018)
(Uniform State/USAID)
a. NIACT is an acronym for "Night Action
Required." It is used with the IMMEDIATE precedence. You must include
the operations signal "ZZK" on ACP-127 format line four of the
formatted telegram.
b. See 5 FAH-2 H-422
for more operational information on using NIACTs.
5 FAH-2 H-237.2-3 Pouch
(CT:TEL-71; 11-08-2018)
(Uniform State/USAID)
a. Use the handling symbol POUCH to send the telegram
by pouch to the associated addressee. A telegram in ACP-127 format should have
"ZEN/" precede the addressee and the word POUCH immediately after, separated
by a space. For example:
ZEN/AMEMBASSY SOFIA POUCH
b. See 14 FAH-4
H-200 Diplomatic Pouch Descriptions and
Procedures for more drafting information on POUCH. See 5 FAH-2 H-250 Special Format Requirements for special
formatting for POUCH, and 5 FAH-2 H-432
for more operational information on POUCH.
5 FAH-2 H-237.3 S/ES-O Review of
Precedence Designators
(CT:TEL-11; 07-19-2004)
(Uniform State/USAID)
The Executive Secretariat Operations Center (S/ES-O)
reviews all incoming FLASH and NIACT IMMEDIATE telegrams to ensure they warrant
high precedence designators. If S/ES-O determines the originating post misused
the high precedence, it will request that the approving officer of the telegram
provide an explanatory statement. If the explanation shows communications regulations
were not followed, S/ES-O will advise the chief of mission of the originating
post.
5 FAH-2 H-238 AND H-239 UNASSIGNED